HL-1430
|
ЧЗВ и отстраняване на неизправности |
How do I clean the corona wire of the drum unit?
If you are experiencing print quality problems, please clean the corona wire as follows:
Do NOT use flammable substances or any type of spray to clean the inside or outside of the machine. Doing this may cause a fire or electrical shock.
-
Unplug the printer.
-
Take the drum unit out of the printer.
We recommend that you place the Drum unit assembly on a piece of disposable paper or cloth in case you accidentally spill or scatter toner.
-
Carefully turn the drum unit upside down.
-
Clean the primary corona wire inside the drum unit by gently sliding the tab from right to left several times.
-
Return the tab to Home position before reinstalling the drum unit.
Be sure to return the tab to the Home position, or printed pages may have vertical stripes.
-
Re-install the drum unit into the printer.
-
Close the front cover.
-
Plug in the power cord.
Ако няма отговор на вашия въпрос, проверихте ли други ЧЗВ?
Проверихте ли в ръководствата?
Ако ви е необходимо допълнително съдействие, моля, свържете се с центъра за клиенти на Brother:
Обратна връзка за съдържанието
За да ни помогнете да подобрим нашата поддръжка, моля, оставете вашата обратна връзка по-долу.