PT-P750W
![]() |
FAQ et Diagnostic |
How can I print wirelessly from a computer in Ad-hoc mode?
Not all computers, mobile devices, and operating systems, may support Ad-hoc mode.
Windows
- Download the Software/Document Installer from the [Downloads] section of this website. The installer allows you to install the printer driver and additional software, such as P-touch Editor and the Printer Setting Tool.
- Double-click the downloaded file to begin the installation.
-
In the [Connection Type] dialog box, select [Local Connection (USB)] and follow the on-screen instructions.
-
When the installation is finished, press and hold the printer's Wireless Mode button until the Wi-Fi® LED is lit.
-
Start the Printer Setting Tool on your computer, and then click the [Communication Settings] button.
For more information about the Printer Setting Tool, see "Using the Printer Setting Tool (for Windows)".
-
Confirm the SSID (Network Name) and the Channel setting, and then select [Ad-hoc] for [Communication Mode] in [Wireless Settings] in the [Wireless LAN] tab.
-
Select [Infrastructure or Ad-hoc] for [Selected Interface] in [Communication Settings] in the [General] tab. Make sure that [Keep Current State] is selected in [Network Settings on Power ON] in the [General] tab.
- If you want the printer to automatically connect to a wireless network, select [On by Default] for [Network Settings on Power ON] in the [General] tab.
-
If you do not want the IP address to change each time, click the [Wireless LAN] tab in the Printer Setting Tool.
Select [STATIC] for [Boot Method] in [TCP/IP(Wireless)], and then enter the information for [IP Address] and [Subnet Mask].
-
Connect your computer to the SSID you confirmed in step 6 and connect to the printer.
Wait until the connection is established.The default SSID is "SETUP".
- Disconnect the USB cable.
- Open the [Devices and Printers] window. For more information, see "How to open the Devices and Printers window".
-
Click [Add a printer].
-
Select [Add a network, wireless or Bluetooth printer].
-
Confirm the printer you connected with Ad-hoc mode in step 8 is selected, and then click [Next].
Check the displayed settings and then click [Next] to add the printer.
-
Confirm that the Editor Lite LED is off. Start the P-touch Editor and select the printer from the drop-down list.
- You can now edit and print labels wirelessly from your computer.
![](/g/b/img/faqend/faqp00100318_002/eu_ot/en/1859538/back_to_top.gif)
Mac
-
Download the Full Software Package from the [Downloads] section of this website, double-click the file, and then start the installer from [Start Here Mac].
-
In the [Connection Type] dialog box, select [Local Connection (USB)] and follow the on-screen instructions.
-
When the [Wireless Device Setup] dialog box is displayed, select [Yes, I have a USB cable to use for installation.].
If this dialog box does not appear, start the [Wireless Device Setup Wizard] from the [Utilities] folder.
-
In the [Available Wireless Networks] dialog box, click [Advanced].
-
In the [Wireless Network Name] dialog box, enter a new name for [Name(SSID)], select the [This is an Ad-hoc network and there is no access point.] check box, and then click [Next].
- Follow the on-screen instructions to complete configuring the connection.
- Disconnect the USB cable.
- Confirm that the Editor Lite LED is off. Start the P-touch Editor and select the printer from the list.
- You can now edit and print labels wirelessly from your computer.
![](/g/b/img/faqend/faqp00100318_002/eu_ot/en/1859538/back_to_top.gif)