TD-4750TNWB
![FAQ et Diagnostic FAQ et Diagnostic](/g/b/shared/img/module/icon_question_33.png) |
FAQ et Diagnostic |
How do I clean / maintain my printer?
> Clean the Sensors
> Clean the Tear Bar/ Peel Bar
> Clean the Exterior/ Interior
Clean the Sensors
-
Turn off the printer.
-
Press the tabs on both sides of the printer, and then lift the Roll Compartment Cover.
![Open cover Open cover](/g/b/img/faqend/faqp00001434_012/eu_ot/en/2356964/cover_open.gif)
-
Use compressed air or vacuum to clean the Gap Sensor (1) and Black Mark Sensor (2).
![Clean sensors Clean sensors](/g/b/img/faqend/faqp00001434_012/eu_ot/en/2356965/cleanprinter_03.gif)
1. Gap Sensor
2. Black Mark Sensor
We recommend cleaning the sensors once per month.
Clean the Tear Bar/ Peel Bar
-
Press the tabs on both sides of the printer, and then lift the Roll Compartment Cover.
![Open cover Open cover](/g/b/img/faqend/faqp00001434_012/eu_ot/en/2356964/cover_open.gif)
-
Wipe the Tear Bar (1) and the Peel Bar (2) with a lint-free cloth dipped in isopropyl alcohol or ethanol, as needed.
![Wipe Tear/Peel Bar Wipe Tear/Peel Bar](/g/b/img/faqend/faqp00001434_012/eu_ot/en/2356967/cleantearbar.gif)
1. Tear Bar
2. Peel Bar
Clean the Exterior/ Interior
Exterior: Wipe with a lint-free cloth dipped in water, as needed.
Interior: Use a brush or vacuum, as needed.
Si vous n'avez pas obtenu de réponse satisfaisante à votre question, avez-vous vérifié d'autres FAQ?
Avez-vous consulté les manuels?
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Modèles apparentés
TD-4650TNWB, TD-4650TNWBR, TD-4750TNWB, TD-4750TNWBR
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.