TD-4750TNWB
FAQ et Diagnostic |
TD-4750TNWB
Date: 01/12/2021 ID: faqp00001434_012
How do I clean / maintain my printer?
> Clean the Sensors
> Clean the Tear Bar/ Peel Bar
> Clean the Exterior/ Interior
- Turn off the printer.
-
Press the tabs on both sides of the printer, and then lift the Roll Compartment Cover.
-
Use compressed air or vacuum to clean the Gap Sensor (1) and Black Mark Sensor (2).
1. Gap Sensor
2. Black Mark SensorWe recommend cleaning the sensors once per month.
-
Press the tabs on both sides of the printer, and then lift the Roll Compartment Cover.
-
Wipe the Tear Bar (1) and the Peel Bar (2) with a lint-free cloth dipped in isopropyl alcohol or ethanol, as needed.
1. Tear Bar
2. Peel Bar
Exterior: Wipe with a lint-free cloth dipped in water, as needed.
Interior: Use a brush or vacuum, as needed.
FAQ connexes
TD-4650TNWB, TD-4650TNWBR, TD-4750TNWB, TD-4750TNWBR
Pour toute assistance supplémentaire, contactez le service clientèle de Brother:
Commentaires sur le contenu
Merci d'indiquer vos commentaires ci-dessous. Ils nous aideront à améliorer notre support.
Étape 1: Comment qualifieriez-vous les informations figurant sur cette page?
Étape 2: Y a-t-il des commentaires que vous voudriez ajouter?
Ce formulaire a pour seul but de nous faire part de vos commentaires.