PT-E110

FAQ & Fehlerbehebung

How do I set tape margins and what features are they?

To set the tape margins, do the following steps:

Press the [Menu] key.
Press the Cursor key ( ) to select [Margin], and then press the [OK] key or the Enter key ( ).
Press the Cursor key to select the margin you want to set from among [Full], [Half], [Narrow] and [Chain Print].
Press the [OK] key or the Enter key.

<Full / Half / Narrow>

Use one of these options to customize the margin length before and after your text.

<Chain Print> (tape-saving option)

Use this option to print multiple different labels with narrow margins. This option saves tape.

Enter text.
Press the [Print] key ( / ).
When [Feed OK?] appears on the LCD, press the [Esc] key to change the text.
Clear the text, enter new text for the next label, and then press the [Print] key.
When [Feed OK?] appears on the LCD after the last label is printed, press the [OK] key.

[Full], [Half] and [Chain Print] are not available for the Cable Wrap, Cable Flag and Faceplate functions.
When you use [Chain Print], feed the tape (Shift key + Preview key / ) before using the cutter, otherwise part of the text may be cut off.
Do not pull the tape. This may damage the tape cassette.
If you select [Half] or [Narrow], the printed dots (:) indicate the end of the label. Cut along the printed dots (:) with scissors.