Innov-is NV800E

FAQ & Fehlerbehebung

FAQ & Fehlerbehebung

"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?

This message is displayed when you try to recall or save a pattern while no USB flash drive is loaded.

Check the following possible problems.

  • Make sure that the USB flash drive is completely inserted into the USB port on the machine.
    If the USB flash drive is inserted, remove the USB flash drive from the USB port and reinsert it.
  • It may take a little time until the machine recognizes the USB flash drive. Wait a few seconds, and try again.

     

If the problem persists, use another USB flash drive.

Wenn Ihre Frage nicht beantwortet werden konnte, haben Sie andere FAQ geprüft?

Haben Sie in den Handbüchern nachgesehen?

Wenn Sie weitere Unterstützung benötigen, wenden Sie sich an den Brother-Kundendienst:

Rückmeldung zum Inhalt

Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.

Schritt 1: Wie hilfreich sind für Sie die Informationen auf dieser Seite?

Schritt 2: Möchten Sie noch ein paar Bemerkungen hinzufügen?

Bitte beachten Sie, dass dieses Formular nur für Rückmeldungen verwendet wird.