Innov-is 500D
![]() |
FAQ & Fehlerbehebung |
"Press needle position button to raise needle." appears on the LCD.
- You tried to select an embroidery pattern or change the layout when the needle was lowered.
- You tried to start sewing when the needle was lowered and without the thread cassette.
- The machine is turned on while the needle is lowered and the embroidery unit is attached.
Each time a key is pressed or an incorrect operation is performed, a beep is sounded.
- For a correct operation
One beep is sounded. - If an incorrect operation is performed
Two or four beeps are sounded. - If the machine locks up, for example, because the thread is tangled
The sewing machine continues to beep for four seconds.
The machine automatically stops.
Be sure to check for the cause of the error, and correct it before continuing to sew.
Rückmeldung zum Inhalt
Helfen Sie uns dabei, unseren Support zu verbessern und geben Sie uns unten Ihre Rückmeldung.