HL-L8260CDN

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 21/04/2017
  • ID: faq00100214_003

Reset the Drum Counter

When you replace the drum unit with a new one, you must reset the drum counter by completing the following steps:

DO NOT reset the drum counter unless you are replacing the drum unit.

  1. Close the front cover.
  2. Make sure the machine is turned on.
  3. Press the Up or Down arrow key to display Machine Info., and then press OK.
  4. Press the Up or Down arrow key to display Parts Life, and then press OK.
  5. Press the Up or Down arrow key to display Drum, and then press OK.
  6. Press and hold OK for about five seconds.
  7. Press the Up arrow key to reset the drum counter.

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-L8260CDN, HL-L8260CDW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit