HL-L8260CDN
 |
FAQs & Troubleshooting |
HL-L8260CDN
Date: 21/04/2017 ID: faq00100214_003
Reset the Drum Counter
When you replace the drum unit with a new one, you must reset the drum counter by completing the following steps:
DO NOT reset the drum counter unless you are replacing the drum unit.
- Close the front cover.
- Make sure the machine is turned on.
- Press the Up or Down arrow key to display Machine Info., and then press OK.
- Press the Up or Down arrow key to display Parts Life, and then press OK.
- Press the Up or Down arrow key to display Drum, and then press OK.
- Press and hold OK for about five seconds.
- Press the Up arrow key to reset the drum counter.
Related FAQs
HL-L8260CDN, HL-L8260CDW
If you need further assistance, please contact Brother customer service:
Content Feedback
To help us improve our support, please provide your feedback below.
Step 1: How does the information on this page help you?
Step 2: Are there any comments you would like to add?
Please note this form is used for feedback only.