Search

Home > Copy > Copy on Both Sides of the Paper (2-sided Copy)

Copy on Both Sides of the Paper (2-sided Copy)

Reduce the amount of paper you use by copying onto both sides of the paper.
  • You must choose a 2-sided copy layout from the following options before you can start 2-sided copying.
  • The layout of your original document determines which 2-sided copy layout you should choose.
  • To use the automatic 2-sided copy feature, you must load your document in the ADF.
  • When you manually make 2 sided copies from a 2-sided document, use the scanner glass.
  • Select A4 sized paper when using the 2‑sided copy option.
Portrait
2–sided to 2–sided
image
1–sided to 2–sided (Long Edge Flip)
image
1–sided to 2–sided (Short Edge Flip)
image
Landscape
2–sided to 2–sided
image
1–sided to 2–sided (Long Edge Flip)
image
1–sided to 2–sided (Short Edge Flip)
image

DCP-L2531DW/DCP-L2535DW/DCP-L2550DW/MFC-L2710DW/MFC-L2713DW/MFC-L2715DW/MFC-L2716DW

  1. Load your document.
  2. Do one of the following:
    • For MFC models

      Press image (COPY).

      Use the dial pad to enter the number of copies you want.

    • For DCP models

      Press image or image to enter the number of copies you want.

  3. Do one of the following:
    • Press 2-sided.

    • Press Options or Copy/Scan Options.

      Press image or image to select [2-sided], and then press OK.

  4. Press image or image to display [Layout Long] or [Layout Short], and then press OK.
  5. Select flip on long edge or flip on short edge, and then press OK.
  6. Press image or image to display [2sided → 2sided] or [1sided → 2sided], and then press OK.
    NOTE

    For DCP-L2531DW/DCP-L2535DW/DCP-L2550DW/MFC-L2710DW/MFC-L2713DW/MFC-L2715DW/MFC-L2716DW

    If you select [2sided → 2sided], you cannot use the ADF. Use the scanner glass.

  7. Press Start.
    If you placed the document in the ADF, the machine scans the pages and starts printing.
    If you are using the scanner glass, go to the next step.
  8. Repeat the following steps for each page of the layout:
    • For MFC models

      After the machine scans the page, place the next page on the scanner glass, and then press image to scan the page.

    • For DCP models

      After the machine scans the page, place the next page on the scanner glass, and then press image to select the [Yes] option.

  9. Press image to select the [No] option.

HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2751DW/MFC-L2770DW/MFC-L2771DW

  1. Load your document.
  2. Press image ([Copy]).
  3. Enter the number of copies.
  4. Press [Options].
  5. Press image or image to display the [2-sided Copy] option, and then press [2-sided Copy].
  6. Press image or image to display the layout options, and then press the option you want.
    NOTE

    For HL-L2395DW/MFC-L2730DW

    If you select [2-sided->2-sided], you cannot use the ADF. Use the scanner glass.

  7. When finished, press [OK].
  8. Press [Start]. If you placed the document in the ADF, the machine scans the pages and starts printing.
    If you are using the scanner glass, go to the next step.
  9. After the machine scans the page, place the next page on the scanner glass, and then press [Yes] to scan the next page.
  10. After scanning all the pages, press [No] to finish.
Was this page helpful?

Yes

No