Search

Home > Security > Use Active Directory Authentication > Configure Active Directory Authentication Using Web Based Management

Configure Active Directory Authentication Using Web Based Management

Active Directory authentication supports Kerberos authentication and NTLMv2 authentication. You must configure the SNTP protocol (network time server) and DNS server configuration for authentication.

  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is your machine's IP address).

    For example:

    https://192.168.1.2

  3. If required, type the password in the Login field, and then click Login.
    image
    The default password to manage this machine’s settings is located on the back of the machine and marked "Pwd".
  4. Go to the navigation menu, and then click Administrator > User Restriction Function or Restriction Management.
    image
    Start from image, if the navigation menu is not shown on the left side of the screen.
  5. Select Active Directory Authentication.
  6. Click Submit.
  7. Click Active Directory Authentication in the navigation bar.
  8. Configure the following settings:
    Option
    Description
    Remember User ID
    Select this option to save your User ID.
    Active Directory Server Address
    Type the IP address or the server name (for example: ad.example.com) of the Active Directory Server.
    Active Directory Domain Name
    Type the Active Directory domain name.
    Protocol & Authentication Method
    Select the protocol and authentication method.
    LDAP Server Port
    Type the port number to connect the Active Directory server via LDAP (available only for LDAP + kerberos authentication method).
    SSL/TLS

    Select the SSL/TLS option.

  9. Click Submit.
Did you find the information you needed?