Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup™ (WPS)
Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup™ (WPS)
If your wireless access point/router supports WPS (PBC: Push Button Configuration), you can use WPS from your machine's control panel menu to configure your wireless network settings.
![image](../images/topic1_icon5.png)
Routers or access points that support WPS are marked with this symbol:
![image](../img/GUID-6D5AFC01-09D2-42B5-99FD-EA70B17C2288-low.gif)
- Press
or
to select the [Network] option, and then press OK.
- Press
or
to select the [WLAN] option, and then press OK.
- Press
or
to select the [WPS] option, and then press OK.
- When [WLAN Enable?] appears, press
to select On.
This will start the wireless setup wizard. To cancel, press.
- When the LCD displays [Press Key on rtr], press the WPS button on your wireless access point/router. Press
on the machine's control panel. Your machine will automatically detect your wireless access point/router and try to connect to your wireless network.
You have completed the wireless network setup. To install Full Driver & Software Package necessary for operating your device, insert the Brother installation disc into your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com.