Search

Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Use Wi-Fi Direct® > Configure Your Wi-Fi Direct Network > Configure Your Wi-Fi Direct Network Using the One-Push Method of Wi-Fi Protected Setup (WPS)

Configure Your Wi-Fi Direct Network Using the One-Push Method of Wi-Fi Protected Setup (WPS)

If your mobile device supports WPS (PBC: Push Button Configuration), follow these steps to configure a Wi-Fi Direct network:
  1. Press image or image to select the [Network] option, and then press OK.
  2. Press image or image to select the [Wi-Fi Direct] option, and then press OK.
  3. Press image or image to select the [Group Owner] option, and then press OK.
  4. Press image or image to select the [On] option, and then press OK.
  5. Press image or image to select the [Push Button] option, and then press OK.
  6. When [Wi-Fi Direct On?] appears, press image to accept. To cancel, press image.
  7. Activate your mobile device's WPS one-push configuration method (see your mobile device's user's guide for instructions) when [Activate Wi-Fi Direct on other device and press OK.] appears on the machine's LCD. Press OK on your machine.
    This will start the Wi-Fi Direct setup. To cancel, press Back.
  8. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed the Wi-Fi Direct network setup. The Mobile Print/Scan Guide for Brother iPrint&Scan contains information on printing from your mobile device. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com to see the guide.
Did you find the information you needed?