Pressing Go will exit the control panel menu and return the printer to the READY state, however, if there is an ERROR indication, the control panel will only change when the error is cleared.
You can pause printing by pressing Go. Pressing Go again restarts the print job. During a pause, the printer is offline.
If data remains in the printer memory, pressing Go will print that remaining data.
You can clear some error indications by pressing
Go. Follow the control panel instructions or see
Identifying your problem to clear all other errors.
Note
| • | The options you have chosen are shown with an asterisk at the end of the display. Since the asterisk shows what you have chosen, you can easily see the current settings as you look through the LCD. |
| • | If the printer is in Pause mode and you do not want to print the data left, press Job Cancel. Once the job has been canceled, the printer will return to the READY state. |
Job Cancel
You can cancel the processing or printing of data by pressing Job Cancel. The LCD shows CANCEL PRINTING until the job is cancelled. After canceling the job, the printer returns to the READY state.
To delete all jobs, press Job Cancel for about 4 seconds. The LCD shows CANCEL ALL JOBS. After canceling all jobs, the LCD shows READY.
When the printer is not receiving data or printing, the LCD shows No Data!!! and you cannot cancel the job.
