Enabling or disabling the wireless network (For HL-5370DW)

If you want to switch the wireless network to enabled/disabled (disabled is the default), please follow these steps:

1	Make sure that the power cord is plugged in.
2	Turn on the machine and wait until the machine is in the Ready state.
3	Hold down Go for 10 seconds. Release Go when the printer prints a Network Configuration page that indicates the current network settings. Note If you release Go in less than 10 seconds, the printer will change to the reprint mode.
4	Check the text to the right of IEEE 802.11b/g in the Node Type section. Active means that the wireless setting is enabled and Inactive means that the wireless setting is disabled. Note You can switch the wireless network to enabled/disabled, using the BRAdmin applications or Web Based Management (web browser). For more information, see Changing the print server settings.