The printer can also report problems by printing an error message. Use the table below to identify and clear the error message. The default setting for the error message printout is off. If you want to turn the error message printout on, from the Advanced tab of the Windows® printer driver click the Other Print Options..., and then choose Error Message Printout.
Error message | Action |
Memory Full | • | Press Go to print the remaining data in the printer memory. Cancel the print job if you want to delete the remaining data in the printer memory. See Control panel buttons. | • | Reduce the complexity of your document or cut the print resolution. | • | |
|
Print Overrun | • | Press Go to print the remaining data in the printer memory. Cancel the print job if you want to delete the remaining data in the printer memory. See Control panel buttons. | • | If this does not clear the error, reduce the complexity of your document or cut the print resolution. | • | | • | Set page protection to Auto by using the supplied Windows® driver or the control panel. | • | Change the following settings in the supplied Windows® driver and try again. The best combination of these settings will vary depending on your document: • | | • | | • | Use Printer TrueType® Fonts |
|
|
Resolution Adapted | • | Reduce the complexity of your document before you print to prevent automatic reduction in the resolution. |
|