You can print a list of the internal fonts using the control panel button or printer driver.
Using the Go button
1
Turn off the printer.
2
Make sure that the front cover is closed and the power cord is plugged in.
3
Hold down Go as you turn on the power switch. Keep Go pressed down until the Back Cover, Toner, Drum and Paper LEDs light up. Release Go. Make sure that the Back Cover, Toner, Drum and Paper LEDs are off.
4
Press Go twice. The printer will print a list of the internal fonts.
Using the printer driver
If you are using the Brother’s Windows® printer driver, you can print a list of the internal fonts by clicking the Print Fonts button in the Support dialog.
