Home > Introduction to Your Brother Machine > Touchscreen LCD Overview
Touchscreen LCD Overview
From the Home screen, you can access the Wi-Fi® setup, Functions, Settings, and Maintenance screens.
Home Screen
![Home Screen](../img/GUID-77090CF5-C630-4B98-9029-1EDA3AFFD466-low.gif)
This screen shows the machine’s status when the machine is idle. When displayed, it indicates that your machine is ready for the next command.
Wireless Status
Each icon in the following table shows the wireless network status:
Your machine is not connected to the wireless access point/router.
Press this button to configure wireless settings. For more detailed information, see the Quick Setup Guide.
The wireless network is connected.
A three-level indicator in each of the Home screens displays the current wireless signal strength.
The wireless access point/router cannot be detected.
The wireless setting is disabled.
You can configure wireless settings by pressing the Wireless Status button.
[Functions]
Press to access the [Functions] menu.
[Web] / [USB] / [Download Software]
[Settings]
Press to access the [Settings] menu.
[Maintenance]
Press to access the [Maintenance] menu.
Quiet Mode
This icon appears when the [Quiet Mode] setting is set to [On].
The Quiet Mode setting can reduce printing noise. When Quiet Mode is turned on, the print speed becomes slower.
- Information icon
New information from Brother appears in the information bar when the notification settings such as [Message from Brother] and [Firmware Auto Check] are set to [On].
(Internet connection is needed, and data rates may apply.)
Press
to view the details.
- Warning icon
The warning icon
appears when there is an error or maintenance message; press
to view the details, and then press
to return to the Home screen.