Search

Configure Your Wi-Fi Direct Network Using the One-Push Method

If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network:
  1. Press image or image to select the [Network] option, and then press OK.
  2. Press image or image to select the [Wi-Fi Direct] option, and then press OK.
  3. Press image or image to select the [Push Button] option, and then press OK.
  4. When [Wi-Fi Direct On?] appears, press image to accept. To cancel, press image.
  5. Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when [Activate Wi-Fi Direct on other device and press OK.] appears on the machine's LCD. Press OK on your machine.
    This will start the Wi-Fi Direct setup. To cancel, press Back.
  6. Do one of the following:
    • When your Brother machine is the Group Owner (G/O), connect your mobile device to the machine directly.
    • When your Brother machine is not the G/O, it will display available device names with which to configure a Wi-Fi Direct network. Press image or image to select the mobile device you want to connect to and press OK. To search for available devices again, press [<Rescan>], and then press OK.
  7. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed the Wi-Fi Direct network setup. The Mobile Print/Scan Guide for Brother iPrint&Scan contains information on printing from your mobile device. Go to your model's Manuals page on the Brother Solutions Center at support.brother.com to see the guide.
Did you find the information you needed?