You should setup the printer near a power outlet that you can easily reach, so that it can be easily unplugged from the power outlet if there is an emergency.
•
Only use the printer within the following ranges of temperature and humidity:
Temperature: 10 °C to 32.5 °C (50 °F to 90.5 °F)
Humidity: 20% to 80% (without condensation)
•
You should use the printer in a well-ventilated room.
•
Put the printer on a flat, horizontal surface.
•
Keep the printer clean. Do not put the printer in a dusty place.
•
Do not put the printer where the ventilation hole of the printer is blocked. Keep a gap of approximately 100 mm (4 in.) between the ventilation hole and the wall.
•
Do not put the printer in direct sunlight. If you have to put it near a window, use a blind or a heavy curtain to protect the printer from direct sunlight.
•
Do not put the printer near devices that contain magnets or generate magnetic fields.
•
Do not subject the printer to strong physical shocks or vibrations.
•
Do not expose the printer to open flames, salty or corrosive gasses.
