Search

Site Map

Home > Network > Wireless Network Settings > Use Wi-Fi Direct® > Configure Wi-Fi Direct Network Using the Push Button Method

Configure Wi-Fi Direct Network Using the Push Button Method

NOTE
For certain models, the wireless network connection can be used only when the optional Wireless Module is installed.
image
When the machine receives a Wi-Fi Direct request from your mobile device, the message [Wi-Fi Direct connection request received. Press [OK] to connect.] appears on the LCD. Press [OK] to connect.
  1. Press image [Settings]>[All Settings]>[Network]>[Wi-Fi Direct]>[Push Button] on your machine's LCD.
    image
    If your mobile device does not support Wi-Fi Direct, do the following:
    1. Press image [Settings]>[All Settings]>[Network]>[Wi-Fi Direct]>[Group Owner], and then press [On].
    2. Press image or image to select the [Push Button].
  2. When the [Activate Wi-Fi Direct on other device. Then Press [OK].] message appears, turn your mobile device‘s Wi-Fi Direct function on (for more information, see your mobile device’s user‘s guide). Press [OK] on your machine.
  3. Do one of the following:
    • If your mobile device displays a list of machines with Wi-Fi Direct enabled, select your Brother machine.
    • If your Brother machine displays a list of mobile devices with Wi-Fi Direct enabled, select your mobile device. To search for available devices again, press [Rescan].
  4. When your mobile device connects successfully, the machine's LCD displays [Connected].
  5. Press [Close].
Related Information
Did you find the information you needed?

find moreaccept