Search

Site Map

Home > Mobile/Web Connect > Brother Web Connect > Set Up Brother Web Connect > Register an Account on Your Brother Machine for Brother Web Connect

Register an Account on Your Brother Machine for Brother Web Connect

You must enter your Brother Web Connect account information and configure your machine so that it can use Brother Web Connect to access the service you want.

  • You must apply for Brother Web Connect access to register an account on your machine.

  • Before you register an account, confirm that the correct date and time are set on the machine.
  1. Press [Functions]>[Web].
    image
    • If information regarding the Internet connection appears on the machine’s LCD, read the information and press [OK]. If you want to display this information again, press [Yes].
    • Occasionally, updates or announcements about Brother Web Connect's features will appear on the LCD. Read the information, and then press [OK].
  2. If the information regarding licence agreement appears, make your selection and follow the on-screen instructions.
  3. Press image or image to display the service with which you want to register.
  4. Press the service name.
  5. If information regarding Brother Web Connect appears, press [OK].
  6. Press [Register/Delete].
  7. Press [Register Account].
    The machine will prompt you to enter the temporary ID you received when you applied for Brother Web Connect access.
  8. Press [OK].
  9. Enter the temporary ID using the LCD.
  10. Press [OK].
    The machine will prompt you to enter the account name that you want displayed on the LCD.
  11. Press [OK].
  12. Enter the name using the LCD.
  13. Press [OK].
  14. Do one of the following:
    • To set a PIN for the account, press [Yes]. (A PIN prevents unauthorised access to the account.) Enter a four-digit number, and then press [OK].
    • If you do not want to set a PIN, press [No].
  15. When the account information you entered appears, confirm that it is correct.
  16. Press [Yes] to register your information as entered.
    image

    An error message will appear on the LCD if the information you entered does not match the temporary ID you received when you applied for access, or if the temporary ID has expired. Enter the temporary ID correctly, or apply for access again to receive a new temporary ID.

  17. Press [OK].
  18. Press image.
Registration is complete and your machine can now access the service.
Related Information
Did you find the information you needed?

find moreaccept