Search

Site Map

Network Reset

Use the Network Reset function to restore the machine's network settings back to its default factory settings (includes IP Address information, except the administrator password).
  • Unplug all the interface cables before you perform a Network Reset.
  1. Press image[Settings]>[All Settings]>[Initial Setup]>[Reset]>[Network Reset].
  2. Do one of the following:
    Option
    Description
    Press Yes for 2 seconds

    Reboot the machine. The machine will begin the reset.

    No

    The machine will exit without rebooting.

    image
    If you exit without rebooting, your machine will not reset and your settings will remain unchanged.
Related Information
Did you find the information you needed?

find moreaccept