Search

Home > Troubleshooting > Network Problems > Use the Network Connection Repair Tool (Windows)

Use the Network Connection Repair Tool (Windows)

Use the Network Connection Repair Tool to fix the Brother machine's network settings. It will assign the correct IP address and Subnet Mask.
Make sure your machine is turned on and is connected to the same network as your computer.
  1. Launch image (Brother Utilities), and then click the drop-down list and select your model name (if not already selected).
  2. Click Tools in the left navigation bar, and then click Network Connection Repair Tool.
  3. Follow the on-screen instructions.
  4. Check the diagnosis by printing the Network Configuration Report or the Printer Settings page.
    image

    The Network Connection Repair Tool will start automatically if you select the Enable Connection Repair Tool option in the Status Monitor. Right-click the Status Monitor screen, and then click Other Settings>Enable Connection Repair Tool. This is not recommended when your network administrator has set the IP address to Static, since it will automatically change the IP address.

If the correct IP address and the Subnet Mask are still not assigned even after using the Network Connection Repair Tool, ask your network administrator for this information.

Did you find the information you needed?