Search

Home > Network > Network Features > Gigabit Ethernet (Wired Network Only) > Configure the Gigabit Ethernet Settings Using Web Based Management

Configure the Gigabit Ethernet Settings Using Web Based Management

Related Models:HL‑L3240CDW / HL‑L3280CDW / HL‑L8240CDW
  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is your machine's IP address).

    For example:

    https://192.168.1.2

  3. If required, type the password in the Login field, and then click Login.
    image
    The default password to manage this machine’s settings is located on the back of the machine and marked "Pwd".
  4. Go to the navigation menu, and then click Network>Wired>Ethernet.
    image
    Start from image, if the navigation menu is not shown on the left side of the screen.
  5. Select Auto from the Ethernet Mode drop-down list.
  6. Click Submit.
  7. To activate the settings, click Yes to restart your machine.

You can confirm your settings by printing the Network Configuration Report.

Did you find the information you needed?