Search

Home > Network > Wireless Network Settings > Use Wi-Fi Direct® > Configure Wi-Fi Direct Network Using the Push Button Method

Configure Wi-Fi Direct Network Using the Push Button Method

Related Models:HL‑L2400DW / HL‑L2400DWE / HL‑L2442DW / HL‑L2445DW / HL‑L2447DW / HL‑L2865DW
If your mobile device supports Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct network:
  1. Press image or image to select the [Network] option, and then press OK.
  2. Press image or image to select the [Wi-Fi Direct] option, and then press OK.
  3. Press image or image to select the [Push Button] option, and then press OK.
  4. When [Wi-Fi Direct On?] appears, select On.
    image
    If your mobile device does not support Wi-Fi Direct, do the following:
    1. Press image or image to select the [Network] option, and then press OK.
    2. Press image or image to select the [Wi-Fi Direct] option, and then press OK.
    3. Press image or image to select the [Group Owner] option, and then press OK.
    4. Press image or image to select the [On] option, and then press OK.
    5. Press image or image to select the [Push Button] option, and then press OK.
  5. Activate Wi-Fi Direct on your mobile device (see your mobile device's user's guide for instructions) when [Activate Wi-Fi Direct on other device and press OK.] appears on the machine's LCD. Press OK on your machine.
    This will start the Wi-Fi Direct setup.
  6. Do one of the following:
    • If your mobile device displays a list of machines with Wi-Fi Direct enabled, select your Brother machine.
    • If your Brother machine displays a list of mobile devices with Wi-Fi Direct enabled, select your mobile device. Press image or image to select the mobile device you want to connect to and press OK. To search for available devices again, select [<Rescan>], and then press OK.
  7. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed the Wi-Fi Direct network setup.
Did you find the information you needed?