Search

Site Map

Home > Mobile > AirPrint > Before Using AirPrint > Disable and Enable AirPrint Using Web Based Management (Web Browser)

Disable and Enable AirPrint Using Web Based Management (Web Browser)

Related Models:HL‑L2350DW / HL‑L2351DW / HL‑L2370DN / HL‑L2375DW / HL‑L2376DW / HL‑L2385DW / HL‑L2386DW

Confirm that your Brother machine is connected to the same network as your computer.

  1. Start your web browser.
  2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).

    For example:

    http://192.168.1.2

  3. No password is required by default. Type a password if you have set one, and then click image.
  4. Click the Network tab.
  5. Click the Protocol menu in the left navigation bar.
  6. To disable AirPrint, clear the AirPrint checkbox. To enable AirPrint, select the AirPrint checkbox.
    image
    By default, AirPrint is enabled.
  7. Click Submit.
  8. Restart your machine to activate the configuration.
Related Information
Did you find the information you needed?

find moreaccept