Search

Site Map

Network Reset

Related Models:HL‑L1238W / HL‑L1808W
Use the Network Reset function to restore the machine's network settings back to its default factory settings (includes IP Address information, except the administrator password).
  • Unplug all the interface cables before you perform a Network Reset.
  1. Turn the machine off.
  2. Make sure that the top cover is closed and the power cord is plugged in.
  3. While holding down image, open and close the top cover once.
  4. Release image. Make sure that all LEDs turn off.
  5. Press image six times. Make sure that all the LEDs light up to indicate the machine has been reset to its network default settings. The machine restarts automatically.
Related Information
Did you find the information you needed?

find moreaccept