LED Patterns and Indications

Home > Introduction to Your Machine > LED Patterns and Indications

The LEDs on your machine's control panel light up, dim, or blink to indicate machine status.

LED indications are defined in the table below.

This table defines what LEDs indicate when they light up, dim, or blink.

LED indication	Status	Meaning
	Sleep	In Sleep mode (Power Save mode), the machine acts as if it is turned off, but it can still receive data. Receiving a print job will wake the machine and it will start printing.
	Ready	The machine is ready to print.
	Data Remaining	There is remaining print data in the machine's memory. Press to print the remaining data in the memory. If the remaining data does not print, resend the print job.
	Please Wait	The machine is warming up.
	Printing	The machine is printing.
	Receiving Data	The machine is either receiving data from the computer or processing data in the memory. When in Receiving Data state, Ready LED ( ) is blinking for one minute, and nothing has printed, it changes to Data Remaining state and Ready LED ( ) lights up.
	Cooling Down	The machine is cooling down. Wait for 10 minutes or until the inside of the machine has cooled down.
	Cancel Printing	The machine is canceling the job.

Related Information

Did you find the information you needed?