Search

Site Map

My Machine Cannot Print over the Network

Cause Action

Your machine disconnects from the wireless network.

  • HL-L1230W/HL-L1232W

    1. Press image and Wi-Fi at the same time.

    2. When your machine connects successfully, the Wi-Fi light and Ready LED ( image ) are on.

Your security software blocks your machine's access to the network.

Some security software might block access without showing a security alert dialog box even after successful installation.

To allow access, see the instructions for your security software or ask the software manufacturer.

Your Brother machine was not assigned an available IP address.

  • Confirm the IP address and the Subnet Mask.

    Verify that both the IP addresses and Subnet Masks of your computer and the Brother machine are correct and located on the same network.

    For more information about how to verify the IP address and the Subnet Mask, ask your network administrator.

  • Windows

    Confirm the IP address and the Subnet Mask using the Network Connection Repair Tool.

A failed print job is still in your computer's print queue.
  • If a failed print job is still in your computer's print queue, delete it.
  • Otherwise, select the printer icon in the following folder and cancel all documents:

    (Windows)

    1. Hold down the image key and press the image key on the computer's keyboard to launch Run.
    2. Type "control printers" in the Open: field and click OK.
      image

      The Devices and Printers window appears.

      image
      If the Devices and Printers window does not appear, click View more devices > More devices and printer settings.

    • Mac:

      Click System Settings > Printers & Scanners or System Preferences > Printers & Scanners.

Your machine is not connected to the wireless network.

Print the WLAN Report to check the error code on the printed report.

See Related Information: Print the WLAN Report.

If you have checked and tried all of the above, but your machine still cannot print, uninstall the driver (Windows) and reinstall it.

Related Information
Did you find the information you needed?

find moreaccept