| |
|
| 3 |
Pull out the MP tray support flap (1).
|
| 4 |
Lift up the support flap to prevent paper from sliding off the face-down output tray, or remove each page as soon as it comes out of the printer.
|
| 5 |
Put paper in the MP tray. Make sure that the paper stays under the maximum paper mark (
 ) on both sides of the tray.
|
| 6 |
While pressing the paper-guide release lever, slide the paper guide to fit the paper size.
|
| 7 |
Send the print data to the printer.
|
Note| • |
The side to be printed on must be face up with the leading edge (top of the paper) in first.
|
| • |
When printing on transparencies, remove each transparency at once after printing. Stacking the printed transparencies may cause a paper jam or the transparency to curl.
|
| |
|