The output density for each colour may vary depending on the environment the machine is in such as temperature and humidity. Calibration helps you to improve the colour density.
1 | Press the + or - key to choose Color Correction. Press OK. Machine Info. ![](../img/spacer30.gif) |
Color Correction ![](../img/spacer30.gif) |
|
2 | Press OK. Color Correction ![](../img/spacer30.gif) ColorCalibration ![](../img/spacer30.gif) |
|
3 | Press OK. ColorCalibration ![](../img/spacer30.gif) Calibrate ![](../img/spacer30.gif) |
|
4 | Press OK again. Calibrate ![](../img/spacer30.gif) OK? ![](../img/spacer30.gif) |
|
You can reset the calibration parameters back to those set at the factory.
1 | Press the + or - key to choose Color Correction. Press OK. Machine Info. ![](../img/spacer30.gif) |
Color Correction ![](../img/spacer30.gif) |
|
2 | Press OK. Color Correction ![](../img/spacer30.gif) ColorCalibration ![](../img/spacer30.gif) |
|
3 | Press the + or - key to choose Reset. Press OK. ColorCalibration ![](../img/spacer30.gif) Reset ![](../img/spacer30.gif) |
|
4 | Press OK again. Reset ![](../img/spacer30.gif) OK? ![](../img/spacer30.gif) |
|