This printer is heavy and weights roughly 29.1kg (64.2 lb). To prevent injuries when moving or lifting this printer, make sure to use at least two people.
When you unpack the printer, make sure that you have all of the following parts.
Printer
Quick Setup Guide
CD-ROM
AC power cord
Insertion sheet and Plastic bag for repacking
Waste toner box
(pre-installed)
Order No. WT-100CL
Toner cartridges (Black, Cyan, Magenta and Yellow)
Order No. TN-130C,TN-130M,TN-130Y, TN-130BK TN-135C, TN-135M,TN-135Y,TN-135BK
Drum unit
(pre-installed)
Order No. DR-130CL
Belt unit
(pre-installed)
Order No. BU-100CL
Interface cable
The interface cable is not a standard accessory. Buy the appropriate cable for the interface you are going to use.
•
USB cable
Do not use a USB interface cable that is longer than 6 feet (2.0 meters).
Do not connect the USB cable to a non-powered hub or a Macintosh® keyboard.
Make sure that you connect it to the USB connector of your computer.
Third party USB ports are not supported for Macintosh®.
•
Parallel cable (HL-4050CDN / HL-4070CDW only)
Do not use a parallel interface cable that is longer than 6 feet (2.0 meters).
Use a shielded interface cable that is IEEE 1284-compliant.
•
Network cable
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network.
WARNING
