1 | Choose the following from the printer driver:
Paper Size
Media Type Paper Source and any other settings.
|
2 | Open the MP tray and lower it gently. |
3 | |
4 | Lift up the support flap to prevent paper from sliding off the face-down output tray, or remove each page as soon as it comes out of the printer. |
5 | Put paper in the MP tray. Make sure that the paper stays under the maximum paper mark . The side to be printed on must be face up with the leading edge (top of the paper) in first. |
6 | While pressing the paper-guide release lever, slide the paper guide to fit the paper size. |
7 | Send the print data to the printer. |