Choose the following from the printer driver:

Paper Size  (1) Media Type  (2) Paper Source  (3) and any other settings.

Pull the paper tray completely out of the printer.

While pressing the green paper-guide release lever, slide the paper guides to fit the paper size. Make sure that the guides are firmly in the slots.

Put paper in the tray, and make sure that the paper is below the maximum paper mark (). The side to be printed on must be face down.

Put the paper tray firmly back in the printer. Make sure that it is completely inserted into the printer.

Lift up the support flap to prevent paper from sliding off the face-down output tray, or remove each page as soon as it comes out of the printer.

Send the print data to the printer.

Choose the following from the printer driver:

Paper Size  (1) Media Type  (2) Paper Source  (3) and any other settings.

Open the MP tray and lower it gently.

Pull out the MP tray support and unfold the flap (1).

Lift up the support flap to prevent paper from sliding off the face-down output tray, or remove each page as soon as it comes out of the printer.

Put paper in the MP tray. Make sure that the paper stays under the maximum paper mark (1). The side to be printed on must be face up with the leading edge (top of the paper) in first.

While pressing the paper-guide release lever, slide the paper guide to fit the paper size.

Send the print data to the printer.