Home PrintPrevious Next

For Macintosh users

IMPORTANT IMPORTANT
DO NOT try to cancel any of the screens during this installation.
1
Turn on your Macintosh.
2
Put the supplied CD‑ROM into your CD‑ROM drive. Double‑click the HL3000 icon on your desktop. Double‑click the Start Here icon. Choose your printer model and the language.
3
Click Install Printer Driver on the menu screen.
Screen
4
Click Wireless Network users.
Screen
5
Choose Driver Install Only, and then click Next. Follow the on‑screen instructions. Then, restart your Macintosh.
Screen
6
The Brother software will search for the Brother printer. During this time the following screen will appear.
Screen
7
Choose the printer you wish to connect, and then click OK.
Screen
Note Note
• 
If there is more than one of the same printer model connected on your network, the MAC Address (Ethernet Address) will be displayed after the model name. You can also confirm your IP Address by scrolling to the right.
• 
You can find your printer’s MAC Address (Ethernet Address) and the IP Address by printing out the Network Configuration page. See Printing the Network Configuration page.
8
When this screen appears, click OK.
Screen
OK!
Setup is now complete.
Page Top
Home PrintPrevious Next