Home PrintPrevious Next

Installation when using Web Services (For Windows Vista® users)

Note Note
• 
You must configure the IP address on your machine before you proceed with this section. If you have not configured the IP address, see Setting the IP address and subnet mask first.
• 
Verify the host computer and print server are either on the same subnet, or that the router is properly configured to pass data between the two devices.
1
Click the Graphic button, then choose Network.
2
The machine’s Web Services Name will be shown with the printer icon. Right-click the machine you want to install.
Note Note
The Web Services Name for the Brother machine is your model name and the MAC Address (Ethernet Address) of your machine (e.g. Brother HL‑XXXX [XXXXXXXXXXXX]).
3
Click Install.
4
When the User Account Control screen appears, do the following.
• 
Users who have administrator rights: Click Continue.
• 
For users who do not have administrator rights: Enter the administrator password and click OK.
5
Choose Locate and install driver software (recommended).
6
Insert Brother CD-ROM.
7
Choose Don’t search online and then Browse my computer for driver software (advanced) on your computer.
8
Choose your CD-ROM drive, and then the install \ your language \ PCL \ win2kxpvista1 folder.
1
win2kxpvista folder for 32-bit OS users and winxpx64vista64 folder for 64-bit OS users
9
Click Next to begin installation.
Page Top
Home PrintPrevious Next