• | Cancel only the printing job: While printing press the Go button for about 4 seconds until all the LEDs light up. The Ready and Error LEDs will flash as the job is being canceled. Cancel all the received jobs: To delete all jobs, press the Go button for about 4 seconds until all the LEDs light up and then release it. Press the Go button again. The Ready and Error LEDs will flash as the job is being canceled. |
• | Wake-up If the printer is in sleep mode, press the Go button to wake the printer up and go to the Ready state. |
• | Error recovery If there is an error, the printer will recover automatically from some errors. If an error is not automatically cleared, press the Go button to clear the error, and then continue to use the printer. |
• | Form feed If the blue Ready LED blinks for a long time, press the Go button. The printer will print any data that is left in the printer’s memory. |
• | To reprint the last document, press the Go button for about 4 seconds until all the LEDs light up and then release it. Within 2 seconds press the Go button the number of times you want to reprint. If you don’t press the Go button within 2 seconds, a single copy will be printed. If you want to use the reprint function open the driver's Properties dialog box and go to the Advanced tab, select the Device options icon and click Job Spooling and then check the Use Reprint check box. See Device Options. |