If you want to switch the wireless network to enabled/disabled, please follow these steps:
| 1 | Make sure that the power cord is plugged in. |
| 2 | Turn on the printer and wait until the printer is in the Ready state. |
| 3 | Hold down the Go button for 10 seconds. Release the Go button when the printer prints a Network Configuration page that indicates the current network settings.  Note | | If you release the Go button in less than 10 seconds, the printer will change to the reprint mode. |
|
| 4 | Check the text to the right side of IEEE 802.11b/g in the Node Type section. Active means that the wireless setting is enabled and Inactive means that the wireless setting is disabled. |
Note
| | You can switch the wireless network to enabled/disabled, using the BRAdmin applications or Web Based Management (web browser). For more information, see Changing the print server settings. |
