Search

Home > Scan > Scan Using the Scan Button on Your Machine > Scan to an Editable Text File (OCR)

Scan to an Editable Text File (OCR)

Your machine can convert characters in a scanned document to text using the optical character recognition (OCR) technology. You can edit this text using your preferred text-editing application.
image
  • The Scan to OCR feature is available only for certain languages.
  • Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent changes, use Brother iPrint&Scan.
  1. Load your document.
  2. Press [Scan]>[to PC]>[to OCR].
  3. If the machine is connected over the network, select the computer name where you want to send data.
    image

    If the LCD prompts you to enter a PIN for the computer, enter the four-digit PIN on the LCD, and then press [OK].

  4. To change the settings, press [Options], and then select the scan settings you want to change. If you use the default settings, skip this step.
    • [2-sided Scan]
    • [Scan Settings]
    • [Colour Setting]
    • [Resolution]
    • [File Type]
    • [Document Size]
    • [Brightness]
    • [Contrast]

      (available only for the [Colour] and [Grey] options)

    • [Auto Deskew]
    • [Skip Blank Page]
    • [Remove Background Colour]

      (available only for the [Colour] and [Grey] options)

    • [Moire Reduction]
    image
    • To change scan settings, a computer with the Brother iPrint&Scan software installed must be connected to the machine.

    • If your machine displays the [OK] button, press [OK].

    • To save the settings as a shortcut, press [Save as Shortcut].

  5. Press [Start].
    The machine starts scanning. If using the machine's scanner glass, follow the touchscreen instructions to complete the scanning job.
Did you find the information you needed?