Search

Home > Paper Handling > Load Documents > Load Documents in the Automatic Document Feeder (ADF)

Load Documents in the Automatic Document Feeder (ADF)

Use the ADF when copying or scanning multi page, standard-sized documents.
  • The ADF can hold the following sheets and feed each sheet individually:

    • (MFC-EX915DW)

      Up to 80 sheets

  • Use standard 20 lb (80 g/m2) paper.
  • Make sure documents with correction fluid or written in ink are completely dry.
IMPORTANT
  • DO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam.
  • DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper-clipped, glued together, or taped.
  • DO NOT use cardboard, newspaper, or fabric.
  • To avoid damaging your machine while using the ADF, DO NOT pull on the document while it is feeding.

Supported Document Sizes

Length:

5.8 to 14.0 in. (147.3 to 355.6 mm)

Width:

4.1 to 8.5 in. (105 to 215.9 mm)

Weight:

17 to 24 lb (64 to 90 g/m2)

  1. Unfold the ADF document output support flap.
    image
  2. Fan the pages well.
  3. Stagger the pages of your document and load it into the ADF face up and top edge first, as shown in the illustration.
    image
  4. Adjust the paper guides to fit the width of your document.
Did you find the information you needed?