Remote commands | Operation details | ||
95 | Change the fax forwarding or fax storage settings | ||
1 OFF | You can choose Off after you have retrieved or erased all your messages. | ||
2 Fax forwarding | One long beep means the change is accepted. If you hear three short beeps, you cannot change because the conditions have not been met (for example, registering a fax forwarding number). You can register your fax forwarding number by entering 4. (See Changing the fax forwarding number.) Once you have registered the number, fax forwarding will work. | ||
4 Fax forwarding number | |||
6 Fax storage | |||
96 | Retrieve a fax | ||
2 Retrieve all faxes | Enter the number of a remote fax machine to receive stored fax messages. (See Retrieving fax messages.) | ||
3 Erase faxes from the memory | If you hear one long beep, fax messages have been erased from the memory. | ||
97 | Check the receiving status | ||
1 Fax | You can check whether your machine has received any faxes. If yes, you will hear one long beep. If no, you will hear three short beeps. | ||
98 | Change the receive mode | ||
1 External TAD | If you hear one long beep, your change has been accepted. | ||
2 Fax/Tel | |||
3 Fax Only | |||
90 | Exit | Press 9 0 to exit remote retrieval. Wait for the long beep, then replace the handset. |