Loading paper and envelopes

The machine can feed paper from the standard paper tray, optional lower tray or multi-purpose tray.

When printing on plain paper 60 to 105 g/m² use the standard paper tray or optional lower tray.

For printing on other types of media use the MP tray (multi-purpose tray).

When you put paper into the paper tray, note the following:

•	If your application software supports paper size selection on the print menu, you can select it through the software. If your application software does not support it, you can set the paper size in the printer driver or by using the control panel buttons.

•	Before using paper that has holes in it, such as organizer sheets, you must ‘fan’ the stack to avoid paper jams and misfeeds.

Loading plain paper in the paper tray

1	Unfold the output paper tray support flap (1).
2	Pull the paper tray completely out of the machine.
3	While pressing the green paper-guide release lever (1), slide the paper guides to fit the paper size. Make sure that the guides are firmly in the slots.
4	Fan the stack of paper well to avoid paper feeding problems.
5	Put the paper into the paper tray with the top edge of the paper in first and the print side face down. Make sure that the paper is flat in the tray and below the maximum paper mark (1).
6	Push the paper tray firmly back into the machine.

1	Unfold the output paper tray support flap (1).
2	Open the MP tray and lower it gently.
3	Pull out the MP tray support flap (1).
4	Put the envelopes (up to 3) or media in the MP tray with the top edge first and the print side face up.