You can access the Advanced options by clicking the Advanced... button on the Layout tab or Paper/Quality tab.
1
Choose the Paper Size and Copy Count(1).
•
Paper Size
From the drop-down box choose the Paper Size you are using.
•
Copy Count
The copy selection sets the number of copies that will be printed.
2
Set the Image Color Management, Scaling and TrueType Font settings (2).
•
Image Color Management
Specifies how to print your color graphics.
•
If you don’t want to enable Image Color Management, click ICM Disabled.
•
If you want the calculations for color matching to be performed on the host computer before it sends the document to the printer, click ICM Handled by Host System.
•
If you want the calculations for color matching to be performed on your printer, click ICM Handled by Printer using printer calibration.
•
Scaling
Specifies whether to reduce or enlarge documents, and by what percentage.
•
TrueType Font
Specifies the TrueType font options. Click Substitute with Device Font (the default) to use equivalent printer fonts for printing documents that contain TrueType fonts. This will permit faster printing; however, you might lose special characters not supported by the printer font. Click Download as Softfont to download TrueType fonts for printing instead of using printer fonts.
3
You can change settings by choosing the setting in the Printer Features list (3):
•
Media Type
You can use the following types of media in your machine. For the best print quality, select the type of media that you wish to use.
Plain Paper
Thin Paper
Thick Paper
Thicker Paper
Bond Paper
Label
Post card
Envelopes
Env. Thick
Env. Thin
Recycled Paper
•
Job Spooling
Secure Print allows you to secure documents that are password protected when they are sent to the machine. Only the people who know the password will be able to print them. Since the documents are secured at the machine, you must enter the password using the control panel of the machine. The secured document must have a Password and Job Name.
•
Password
Choose the password for your secured document that you send to the machine from the drop-down box.
•
Job Name
Choose the Job name from the drop-down list for your secured document that you sent to the machine.
•
Print Quality
You can choose the following print quality settings.
•
Normal
600 dpi class. Recommended for ordinary printing. Good print quality with good print speeds.
•
Fine
2400 dpi class. The finest print mode. Use this mode to print precise images such as photographs. Since the print data is much larger than in normal mode, processing time, data transfer time and printing time will be longer.
•
Toner Save Mode
You can conserve toner using this feature. When you set Toner Save Mode to On, print appears lighter. The default setting is Off.
Note
We do not recommend Toner Save Mode to On for printing Photo or grayscale images.
•
Color/Mono
You can change the Color/Mono settings as follows:
•
Color
If you want the printer to use Color mode even when printing monochrome document, select this mode.
•
Mono
Select this mode if your document has only black and grayscale text and/or objects. Mono mode makes the print processing speed faster than color mode. If your document contains color, selecting Mono mode prints your document in 256 levels of gray.
•
Auto
The printer checks the content of your documents for color. If color is detected, it prints in color. If no color content is detected, it prints in monochrome. This operation may reduce the total printing speed.
Note
If the Cyan, Magenta or Yellow toner runs out, choosing Mono will allow you to keep printing as long as the Black toner does not run out.
•
Gamma Correction
You can adjust the brightness of documents compared to the image on the screen.
•
Color Mode
The following options are available in Color Mode:
•
Normal
This is the default color mode.
•
Vivid
The color of all elements are adjusted to become a more vivid color.
•
Improve Gray Color
You can improve the image quality of the shaded area.
•
Enhance Black Printing
If a black graphic cannot print correctly, choose this setting.
•
Halftone Screen Lock
Stops other applications from modifying the Halftone settings. The default setting is on.
•
High Quality Image Printing
You can get high quality image printing. If you set High Quality Image Printing to On, the printing speed will be slower.
•
BR-Script Level
You can change the BR-script emulation language level. Choose the level from the drop-down list.