Print Settings

Basic tab

•

Media Type

You can choose from the following media types:

•

Colour/Mono

You can change the Color/Mono settings as follows:

•	Auto The printer checks the content of your documents for color. If color is detected, it prints in color. If no color content is detected, it prints in monochrome. The total printing speed may become slower.
•	Color When your document contains color and you want to print it in color, select this mode.
•	Mono Select this mode if your document has only black or greyscale text and/or objects. Mono mode makes the print processing speed faster than color mode. If your document contains color, selecting Mono mode prints your document in 256 levels of grey.

Note

If the Cyan, Magenta or Yellow toner runs out, choosing Mono will allow you to keep printing as long as the Black toner does not run out.

•

Mirror Print

Check Mirror Print to reverse the data from left to right.

•

Reverse Print

Check Reverse Print to reverse the data from top to bottom.

•

Toner Save Mode

You can conserve toner using this feature, when you set Toner Save Mode to On, print appears lighter. The defaults setting is Off.

Note

We do not recommend Toner Save Mode for printing Photo or greyscale images.

Advanced tab

•

Print Quality

You can change the print quality as follows:

•	Normal 600 x 600 dpi. Recommended mode for ordinary printouts. Good print quality with reasonable printing speed.
•	Fine 2400 dpi class. The finest print mode. Use this mode to print precise images such as photographs. Since the print data is much larger than in normal mode, processing time, data transfer time and printing time will be longer.

•

Colour Mode

You can change the color mode as follows:

•	Normal This is the default color mode.
•	Vivid The color of all elements are adjusted to become a more vivid color.

•

Improve Grey Colour

You can improve the image quality of shaded areas by ticking the Improve Grey Colour check box.

•

Enhance Black Printing

If a black graphic cannot be printed correctly, choose this setting.