Scan to Image

When you choose Scan to Image, your document will be scanned and sent directly to the PC you designated on your network. ControlCenter3 will activate the default graphics application on the designated PC. You can change the scan configuration. (See Image (example: Microsoft^® Paint).)

1	Put the document face up in the ADF, or face down on the scanner glass.
2	Press (Scan).
3	Press or to choose Scan to Image. Press OK.
4	Press or to choose the destination PC you want to send to. Press OK. If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination PC on the control panel. Press OK.
5	Press Black Start or Color Start. The machine starts the scanning process.

Note

•	Scan type depends on the settings on the Device Button tab, Black Start or Color Start do not change the settings.
•	If you want the scanned data in color, choose color in scan type on the Device Button tab of the ControlCenter3 configuration. If you want the scanned data in black and white, choose black and white in scan type on the Device Button tab of the ControlCenter3 configuration. (See SCAN.)

Page Top