When you choose Scan to File, you can scan a black and white or color document and send it directly to a Macintosh
® you designate on your network. The file will be saved in the folder and file format that you have configured in ControlCenter2 on the designated Macintosh
®. You can change the Scan configuration. (See
File.)
| 1 | Put the document face up in the ADF, or face down on the scanner glass. |
| 2 | Press  ( Scan). |
| 3 | Press  or  to choose Scan to File. Press OK. |
| 4 | Press or to choose the destination Macintosh ® you want to send to. Press OK. If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination Macintosh® on the control panel. Press OK. |
| 5 | Press Black Start or Color Start. The machine starts the scanning process. |
Note
| • | Scan type depends on the settings on the Device Button tab, Black Start or Color Start do not change the settings. |
| • | If you want the scanned data in color, choose color in the scan type on the Device Button tab of the ControlCenter2 configuration. If you want the scanned data in black and white, choose black and white in the scan type on the Device Button tab of the ControlCenter2 configuration. (See File.) |
| • | If you would like to change the file name of scanned documents, enter the file name in File Name section on the Device Button tab of the ControlCenter2 configuration. |
