When you are sending a fax, the machine will scan the documents into the memory before sending. Then, as soon as the telephone line is free, the machine will start dialling and sending.
If the memory is full, the machine will send the document in real time (even if Real Time TX is set to Off).
Sometimes, you may want to send an important document immediately, without waiting for memory transmission. You can set Real Time TX to On for all documents or Next Fax:On for the next fax only.
Note
| | In Real Time Transmission, the automatic redial feature does not work when using the scanner glass. |
Sending in real time for all faxes
| 1 | Make sure you are in Fax mode  . |
| 2 | Press Menu, 2, 2, 5. |
| 3 | Press  or  to choose On. Press OK. |
Sending in real time for the next fax only
| 1 | Make sure you are in Fax mode . |
| 2 | Press Menu, 2, 2, 5. |
| 3 | Press or to choose Next Fax:On. Press OK. |
Not sending in real time for the next fax only
| 1 | Make sure you are in Fax mode . |
| 2 | Press Menu, 2, 2, 5. |
| 3 | Press or to choose Next Fax:Off. Press OK. |
