Loading documents

Using the automatic document feeder (ADF)

The ADF can hold up to 50 pages and feeds each sheet individually. Use standard 80 g/m² paper and always fan the pages before putting them in the ADF.

Recommended environment

Temperature: 20 to 30°C

Humidity: 50% - 70%

Paper: APP Blue Flagship 70 g/m², APP Gold Flagship 80 g/m² or Advanced Agro Double A 80 g/m²

IMPORTANT

•	DO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam.
•	DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper-clipped, pasted or taped.
•	DO NOT use cardboard, newspaper or fabric.
•	To avoid damaging your machine while using the ADF, DO NOT pull on the document while it is feeding.

Note

To scan non-standard documents see Using the scanner glass.

•	Make sure documents written with ink are completely dry.
•	Documents to be faxed must be from 148 to 215.9 mm wide and from 148 to 355.6 mm long, and of a standard weight [80 g/m²].

1	Unfold the ADF document output support flap (1) and the ADF support flap (2).
2	Fan the pages well.
3	Place your document face up, top edge first in the ADF until you feel it touch the feed roller.
4	Adjust the paper guides (1) to fit the width of your document.

Page Top