When the toll saver feature is on, the machine will answer after two rings if you do have voice or fax messages, and after four rings if you do not have any messages.
This way, when you call your machine for remote retrieval, if it rings three times, you have no messages and can hang up to avoid a toll charge.
The toll saver feature is only available when TAD mode is on. When toll saver is On, it overrides your ring delay setting.
If you are using BT Call Sign, do not use the Toll Saver feature.
| 1 | Press MENU. |
| 2 | Press  or  to display Fax. |
| 3 | Press Fax. |
| 4 | Press or to display Setup Receive. |
| 5 | Press Setup Receive. |
| 6 | Press or to display Ring Delay. |
| 7 | Press Ring Delay. |
| 8 | Press Toll Saver. |
| 9 | Press On (or Off). |
| 10 | Press Stop/Exit. |
